Festo — EXPT-95/120 — 2021-08d
Transport and storage
7
2.3
Unpacking
NOTICE
Damage to the product from incorrect removal of the transport crate
• At least two people are required to dismantle the transport crate.
• Use the appropriate tool to loosen the screws.
• Make sure that packaging parts cannot fall onto the parallel kinematic system.
• Keep the packaging for later use or dispose of it properly.
Removing the transport crate cover
1.
Unscrew and remove all screws
2.
Lift the cover enough to transport it away
3.
Place or lay down the cover at a safe distance from
the parallel kinematic system
Removing the transport crate side walls
4.
Remove each side wall one by one in the sequence
"long
1
, short
2
, long
3
; short
4
" side wall.
1
2
3
4
5.
Unscrew and remove all screws
6.
Remove the side wall and place or lay it down at a
safe distance from the parallel kinematic system
Removing the packaging foil
7.
Cut the foil parallel to the contour of the product
with an appropriate tool. When cutting, make sure
that the parallel kinematic system is not scratched
or damaged. Then pull the foil up and away.
Tab. 3: Unpacking
