Festo EHMB Series, Operating Instructions Manual

Page: 14 / 20

EHMB
14 Festo – EHMB – 2019-05c English
9 Accessories
è
www.festo.com/catalogue
Maintenance accessories:
Designation Part number/type
Grease gun with needle-pointed nozzle 647958/LUB-1
1)
Lubrication adapter 705639/LUB-1-TR
1)
Roller bearing grease LUB-KB2 from Festo
1)
1) (
è
Spare parts catalogue at www.festo.com/spareparts)
Tab. 4
10 Fault clearance
Malfunction Possible cause Remedy
Squeaking noises or
vibrations
Controller is set incorrectly. Change parameters.
Overloading/fatigue Send EHMB to Festo or contact the
local Festo service.
Shock absorber is defective
(if a pneumatic cylinder is used).
Change shock absorbers.
Rotary/lifting
module does not
move
Load levels are too high. Reduce load mass/torques.
Reduce travel speed.
Send EHMB to Festo or contact the
local Festo service.
Mounting screws are too long. Observe max. screw-in depth
(
è
5.3 Attachment of the payload).
Motor is blocked. Eliminate cause
Linear guide is defective. Send EHMB to Festo or contact the
local Festo service.
Drive shaft can be
turned freely
Toothed belt has broken
Clamp of the motor coupling has
loosened.
Check mounting, tighten clamping
screw.
Tab. 5