Festo CTEU-EC, Description

Page: 20 / 110

1. Installation
1-4
Festo P.BE-CTEU-EC-OP+MAINT-EN en 1208NH
The fieldbus and device levels are connected via an I-port.
I-port is a Festo-specific port for the transmission of commu-
nication data (process data, sensor signals, pilot signals) and
supply voltage. The I-port communication protocol is based
on the IO-Link protocol. The electrical and mechanical connec-
tions between the bus node and I-port device are standard-
ised.
1.1.2 Scope of functions (brief overview)
– Real-time Ethernet communication (EtherCAT)
– Deterministic data transmission
– Master-slave system architecture
– Modular valve terminal configuration (MDP)
– Diagnostic data via CoE
– Parameter data via CoE
– Hot Connect function for connecting and disconnecting
devices during operation
– Module address can be altered via DIL switches
– Adjustable fail state behaviour
– Activation of module diagnostics via DIL switches