manualshive.com logo in svg

Festo CRDNG Series, Repair Instructions, Page: 11 / 26

Share
Download
Festo CRDNG Series Repair Instructions Download Page 11

11 / 26

Festo 7CRDNGb_en

4 

Repair steps

4.1 

Preparation

• 

Before starting the repair, remove any attachments in accordance with the instructions in the accompanying 
operating instructions.

• 

Keep your working environment tidy.

• 

Only use the spare parts and assembly aids (grease, locking agent, etc.) provided in the set of wearing parts.

Warning

Make sure that the bearing cap cannot suddenly come flying off.
• 

Remove the non-return valves and tubing connection from the cylinder and depressurise the cylinder completely 
so that any pressure present is not suddenly released when the cylinder is opened.

To prevent damage to sealing rims or guide surfaces, do not use pointed or sharp-edged assembly aids.

4.2 

Visual inspection

Check the cylinder for visible damage that might impair its function (e.g. warping of the piston rod) as well as deposits 

and scoring. The entire cylinder must be replaced if the cylinder barrel is showing significant damage.

4.3 

Repairing the cylinder CRDNG(S)-…

The description in this chapter can be used to repair cylinders of the type CRDNG(S)-… with the following features:

CRDNG

CRDNGS (with swivel flange)

Code Description

Code Description

PPV

Adjustable pneumatic cushioning

PPV

Adjustable pneumatic cushioning

A

External position sensing

A

External position sensing

S2

Through piston rod

Summary of Contents for CRDNG Series



























Reviews:

No comments