CPX-FVDA-P...
Festo CPX-FVDA-P... 1011NH English
32
6
Technical data
Technical data
CPX-FVDA-P
General technical data for CPX terminal
See CPX system description
(P.BE-CPX-SYS...)
Electric characteristic values
– Nominal operating voltage DC
[V DC]
24
– Permissible voltage fluctuations
[%]
-15 ... +20
– Operating voltage for tapping contact
rails 24 V
VAL
and 0 V
VAL
(integrated re-
verse polarity protection)
[V DC]
20,4 ... 28,8
– Residual ripple (within tolerance)
[Vss]
2
– Voltage drop bypass time U
VAL
[ms]
2
– Intrinsic current consumption at nominal
operating voltage
[mA]
for valves (from U
VAL
):
typ. 65
for electronics (from U
EL/SEN
):
typ. 25
– Undervoltage monitoring U
VAL
U < 20 V for t > 200 ms
– Overvoltage monitoring U
VAL
U > 29.5 V for t > 200 ms
– Operating voltage when tapping contact
rail 5 V and 0 V
[V]
5 ± 5%
– Electrical isolation between V
EL,SEN
(or 5 V CBUS) and V
VAL
[V rms]
min. 500
– Electrical isolation channel – internal bus
Yes, for intermediate supply
– Electrical isolation channel – channel
No
– Potential reference for channels
V
VAL
– Max. power supply CH0 (load current)
[A]
1.5
– Max. power supply CH1, CH2
(load current per channel)
[A]
0.5 A (12 W lamp load)
– Max. load current per unconnected
voltage U
VAL
(auxiliary supply)
[A]
2.5