Festo Checkbox Compact CHB-C-C, Manual

Page: 83 / 138

5. Teaching parts
5-5
Festo P.BE-CB-COMP-EN en 0211a
5.2 The teach procedure
As the Checkbox PLC can save up to 4 different parts types,
the signals to the PLC inputs must be set according to the
binary coding of the desired parts type (see chapter 4.3.2,
table “Binary coding”). The signals must be present perma-
nently.
tool If, when the parts type is selected in the display, the informa-
tion “tool” is shown, the memory address is assigned with
additional software tools. The teach procedure can neverthe-
less be carried out. Further information can be found in the
CheckOpti manual.
S
Switch the Checkbox to the stop status.
S
Start the conveyor device.
Operating status: STOP
The START/STOP button shows a green light perma-
nently
STOP
The display shows STOP
Carry out the teach procedure of parts type 1 at first for the
nominal orientation (orientation 1):
1. Press the button STATUS/TEACH.
Fix
If “Fix” is displayed when the STATUS/TEACH button is
pressed for 1.5 s, the STATUS/TEACH key is blocked by
CheckKon. The Checkbox can be started or stopped manually,
but a switch to the TEACH mode is not possible. The Check-
box remains in auto mode. Switch off the button lock in
CheckKon with the parameter “System/operating mode lock
of the TEACH
button = ...”.