Inhalt/Content
4
© Festo Didactic 696688
1
Introduction
___________________________________________________ 53
1.1
Training contents _______________________________________________ 54
1.2
Important notes ________________________________________________ 55
1.3
Responsibility of licensee ________________________________________ 55
1.4
Responsibility of trainees _________________________________________ 55
1.5
Potential hazards when using the modular production system __________ 56
1.6
Warranty and liability ____________________________________________ 57
1.7
Intended use ___________________________________________________ 57
2
Safety instructions
______________________________________________ 58
3
Technical data
_________________________________________________ 59
4
Transport/unpacking/scope of delivery
____________________________ 60
5
Design and function
_____________________________________________ 61
5.1
The reactor station ______________________________________________ 61
5.1.1 Construction in the form of an individual station ______________________ 63
5.1.2 Construction in the form of a downstream station ____________________ 64
5.2
Function of the cooling pump/pump of downstream PA station _________ 65
5.3
Heating unit/ Temperature sensor _________________________________ 66
5.4
Level monitoring ________________________________________________ 68
5.5
EMERGENCY-STOP ______________________________________________ 69
5.6
Stirring module _________________________________________________ 70
5.7
Function of the temperature control system _________________________ 71
5.8
Connection board _______________________________________________ 72
5.9
Sequence description of the reactor process _________________________ 73
6
Commissioning
_________________________________________________ 75
6.1
Workstation ____________________________________________________ 76
6.2
Visual inspection ________________________________________________ 76
6.3
Cable connections _______________________________________________ 77
6.4
Filling and emptying _____________________________________________ 78
6.5
Power supply ___________________________________________________ 78
6.6
Adjusting sensors _______________________________________________ 79
6.6.1 Capacitive proximity sensor _______________________________________ 79
6.6.2
Float switch ____________________________________________________ 80
6.7
Downloading the PLC program ____________________________________ 81
6.7.1 Siemens controllers _____________________________________________ 81
6.7.2 Festo controller _________________________________________________ 84
6.7.3 Allen Bradley controllers _________________________________________ 86
6.7.4 Mitsubishi/MELSEC controllers ____________________________________ 89
6.8
Touch panel ____________________________________________________ 91
7
Maintenance
___________________________________________________ 99
8
Contents of the CD-ROM and updates
_____________________________ 100
English
