Festo 530906, Operating Instructions Manual

Page: 42 / 148

DGC−...
Festo DGC−... 0604b English
42
Accurate adjustment of the stroke:
1. Loosen locking nut K.
2. Screw the cushioning element in or out.
Ple as e note
S
For reasons of stability, d i s t a n c e d from Fig.31 must not exceed the
values in the following table:
DGC − 8/12 18 25 32/40
G / G F/KF−P/PPV 5 mm 2 mm
*)
4 mm
*)
5 mm
*)
G F−YSR(W ) 10 mm
KF−YSR(W ) 10 mm 20 mm 25 mm
*)
Restriction: additional masses and speed must be reduced
Fig.32
W a rnin g
The DGC−... will be damaged if it is operated without the stop sleeve (H) and the
locking nut (K).
S
Fit the shock absorbers (or the pneumatic cushioning) together only with the
stop sleeve (H)
a n d the locking nut (K).
3. Tighten the locking nut (K) again.
Tightening torques:
8/12 18 25 32 40
DGC − G − P / YSR(W ) 2 Nm
DGC − G F− YSR(W ) 3 Nm 5 Nm 8 Nm 20 Nm
DGC −KF− YSR(W ) 2 Nm 5 Nm 20 Nm 20 Nm 35 Nm
Fig.33: Tightening torques for locking nut K
d
Fig.31
H K
F