2009/06 – Subject to change
45
Internet: www.festo.com/catalogue/...
Valve terminals type 32 MPA
Key features – Display and operation
Manual override (MO)
MO with automatic return (non-detenting)
MO set via turning (detenting)
1
2
1
Press in the stem of the MO with
a pin or screwdriver.
Pilot valve switches and actuates
the main valve.
2
Remove the pin or screwdriver.
Spring force pushes the stem of
the MO back.
Pilot valve returns to its initial
position and so too the single
solenoid main valve (not with
double solenoid valve code J).
1
2
1
Press in the stem of the MO with
a pin or screwdriver until the
valve switches and then turn the
stem clockwise by 90° until the
stop is reached.
Valve remains actuated.
2
Turn the stem anti-clockwise by
90° until the stop is reached and
then remove the pin or
screwdriver. Spring force pushes
the stem of the MO back.
Valve returns to its initial posi-
tion (not with double solenoid
valve code J).
Inscription system
VMPA1-ST-1-4
approx. 38 x 9 mm
Inscription field
approx. 20 x 45 mm
An inscription label holder
VMPA1-ST-1-4 (Part No. 533 362,
code T in the order code) or
VMPA1-ST-2-4 (Part No. 544 384, for
holding IBS-6x10 inscription labels)
can be mounted on each manifold
block with a width of 42 mm for
labelling the valves.
Large inscription labels can be
applied to the pneumatic interface as
an alternative or complement to the
smaller labels.
The following inscription labels can be
used as spares:
•
Inscription label MPA
(20 x 45 mm): Part No. 663 010