18
While the appliance is drawed away from
the wall it would be advisable to check that
the water lock is clean. If there is much
dirt in the water lock is it possible that
water doesn't drain like it should.
The water lock can be loosened by
unscrewing the screw of the water lock.
The water lock is situated above the
compressor at the end of the drain pipe
behind the appliance.
Also the evaporation pan is advisable to
clean.
The doors are advisable to adjust if they
are not straigth and even.
Also the hinges are advisable to oil at the
same time.
Stainless steel doors and front parts
of the drawers are coated with Easy
Clean coating. It protects the surface
against dirt. Do not use cleaning agent
for steel surfaces because it damages
the protective coating.
Functional disorders
CORRECTING MINOR DISORDERS
All functional disorders do not necessarily
require the help of service personnel. So
check first whether you can eliminate the
disorder with the aid of the following
instructions.
If there is no fault in the appliance, you
yourself will be obliged to pay the costs
arising from any servicing visits, also du-
ring the guarantee period.
If the cooling mechanism does not
work, check that:
•
you have followed the advice in the
operating instructions
•
the plug is properly in the socket
•
the fuse is intact
•
the main switch and operating switches
are in the ‘ON’ position
•
there are no interruptions in electricity
distribution
NOTE!
If the temperature of the surroun-
dings becomes unusually high, the inter-
nal protective device of the compressor
may stop the mechanism. Depending on
the conditions, restarting may take ½ - 1
hour.
If the cooling capacity is poor:
•
check that too much frost has not ac-
cumulated on the expansion coil
•
check that the doors and drawers are
tightly closed
•
the doors may have been opened often
or kept open for too long
•
too many goods at a time may have
been put in to cool
•
the air circulation outside or inside may
have been hindered
The light inside the cooling cabinet:
The light inside the cooling cabinet is
long-life 3 W LED-light.
If the light doesn't work, please contact
the Festivo-service organization.
The freezer displays excess tempera-
ture (E3):
Check first if:
• Too many goods at a time may have
been put in to freezing without SF-fun-
ction
Freezing the products arises the tem-
perature inside the freezer. That may
cause the display excess temperature.
In that case there is no malfunction in
the freezer and alarm disappears du-
ring freezing.
• The door of the freezer is open.
Summary of Contents for 75 CF
Page 21: ......
