19
Cooling cabinet
E1
+ sound signal = sensor fault
Acknowledge and stop the sound signal
by pressing the C-button of the display.
E1 will remain on the display.
The cooling cabinet will operate despite
the sensor fault according to the prog-
ramme set by using the control bar.
Temperature inside the cooling cabinet
may vary. The fault must be repaired.
Please contact the Festivo-service
organization.
E5
+ sound signal = excess temperature,
cooling cabinet.
The error message will appear 1½ hour
after the temperature e14 °C.
Acknowledge and stop the sound signal
by pressing the C-button of the display.
E5 will remain on the display.
Look first at page 18, Functional
Disorders.
If the above mentioned functions are in
order but the appliance does not begin
cooling within about two hours, contact
the Festivo-service organization.
Error messages
If the above mentioned functions are in
order, but the appliance does not begin
cooling within about two hours, contact
the Festivo-service organization.
Freezer
E2
+ sound signal = sensor fault
Acknowledge and stop the sound signal
by pressing the F-button of the display.
E2 will remain on the display.
The freezer will operate despite the
sensor fault, according to the programme
set by using the control bar.
Please contact the Festivo-service orga-
nization.
E3
+ sound signal = excess temperature,
freezer
The error message will appear 1½ after
the temperature exceeds -12 °C.
Acknowledge and stop the sound signal
by pressing the F-button of the display.
E3 will remain on the display.
NOTE!
It is possible that there will be an error
message of too warm freezer if speedy
freezing has not been used and large
quantities has been freezed.
Error messages, cooling cabinet or
freezer
E7
+ sound signal = contact fault between
display and adjuster.
Acknowledge and stop the sound signal
by pressing the C- or F-button of the
display.
E7 will remain on the display.
Please contact the Festivo-service orga-
nization.
Summary of Contents for 75 CF
Page 21: ......
