MACHINES AND
ACCESSORIES
Page 19 of 28
3. After returning the machine to an upright
position, insert the two ends of the handle into
the appropriate holes, then tighten the two
fastening screws using an Allen key.
Figure 9 - Handle locking screws.
4. Attach the dust suction tube (the one with the largest diameter) by fixing one end of
the protruding tube into the rear / bottom of
the drum and the other end to the brush.
5. Attach the sandblasting granule discharge tube
(the transparent one) by fixing one end to the
rear / bottom of the drum with a clip, the other
end is already connected to the gun.
6. Attach the compressed air suction tube (the
orange one) by fixing one end to the rear /
bottom of the drum with a clip, the other end is
already connected to the gun.
7. Attach a quick coupling to the compressed air
inlet
Figure 10 – Air coupling
8. Attach the gun to the rear part of the brush, inserted inside the ceramic nozzle and
secure the assembly by tightening the grub screw.
9. Put the abrasive material on the bottom of the drum then place it on the suction dust
collection bucket.
10.Grasp the upper lid using the relative handle, then place it on top of the drum, having
first inserted the air filter inside the drum itself.
11.Close the fastening hook properly
fervi.com
