MACHINE AND
ACCESSORIES
Page 14 / 26
It is not recommended to extend the continued use of the machine for more than 10 minutes
to avoid overheating of the machine (which could damage the motor) and the tool.
NOTE: The Portable chamfering machine can not operate in environments with
potentially explosive atmospheres. It is therefore the responsibility of the operator
to avoid using the Sharpener in an environment with flammable vapours and/or
explosives.
Danger of explosion
The Portable chamfering machine has NOT been designed to operate in environments with a
potentially explosive atmosphere.
7.2 Using the machine
The tungsten carbide inserts are used to perform the cutting (chamfering) of angled parts
and sharp edges of metallic materials, whether they are small-sized items or the edges of
work surfaces.
NOTE: If the edge to be machined is damaged and has cavities and/or protrusions,
chamfering can still be carried out, but pay particular attention and hold the
machine firmly to prevent kickback and loss of stability.
All adjustments must be carried out with the machine off and the power cord unplugged from
the power outlet.
Machine adjustment
The graduated scales are merely indicative, should a strict adjustment be required it is
necessary to use appropriate measuring instruments.
Machine adjustment
Before starting chamfering operations it is necessary to carry out appropriate adjustments to
the machine. To do this, proceed as follows:
Adjust the chamfering angle, loosen the 4
allen screws that secure the guides in place.
Figure 6 - Guide adjustments.
fervi.com
