MACHINE AND
ACCESSORIES
Page 23 / 26
10 TROUBLESHOOTING
PROBLEM
CAUSES AND SOLUTIONS
The machine will not
start.
Check the connection to the mains supply.
Press the green button to start.
Make sure the automatic system for interruption of the power
supply has not been engaged, in this case, unplug the
machine and contact Technical Support.
Press the confirmation button and hold down the enabling
switch on the handle.
Electrical problems with
the motor
or other parts
(overheating, bad
contacts, etc.)
Allow the machine to cool in the event of prolonged use.
Consult the Service Department.
The chamfering is not
even.
Make all the adjustments to the machine, paying special
attention to the inclination of the spindle.
Make sure that the support guides are fitted correctly.
Check that the chamfer depth is not excessive, if the thrust
force is excessive it will result in irregular feeding.
Make sure that the inserts are all mounted correctly and are
not worn and/or damaged.
Make sure the material to be chamfered is smooth and that
there are no parts made of different materials.
The inserts are
damaged and/or worn
Carry out the rotation and if necessary replacement (use only
original spare parts).
fervi.com
