Ferroli RVL-I PLUS, Installation And Maintenance Manual

Page: 16 / 92

16
RECEPTION AND POSITIONING
Before installation
Be sure to confirm the model name and the serial number of
the unit .
Handling
Due to relatively large dimensions and heavy weight, the unit
should only be handled using lifting tools with slings . The
slings can be fitted into foreseen sleeves at the base frame
that are made specifically for this purpose.
■ To avoid injury, do not touch the aluminum
fins of the unit.
■ Do not use the grips in the fan grills to
avoid damage .
■ The unit is top heavy! Prevent the unit
from falling due to improper inclination during
handling .
CAUTION
Position of barycenter
Do not unpack
Rope
≥1000mm
Make the rope go through the
lifting holes from both the right
and left sides in the wooden
collet
Do not unpack
Rope
Position of barycenter
Make the rope go through
the lifting holes from both
the right and left sides in the
wooden collet
Inspections on arrival
As soon as the appliance is consigned, it is essential to make sure that all the ordered items have been received and that the
shipment is complete . Carefully check that the equipment has not been damaged . If visible damage is discovered, immediately
inform the haulage contractor and write “Collected with reserves owing to evident damage” on the consignment note .
Delivery ex works means that, as established by law, reimbursement of any damages is at the insurance company’s charge .
Storage
The units must be stored in a dry place, sheltered from the sun, rain, sand and wind .
Comply with the storage conditions given below:
• Do not stack the units
• Maximum temperature = 60°C
• Minimum temperature = -10°C
• Humidity = 90%
• Avoid placing the units packaged with thermoretractable protection under the sun since the pressure inside the refrigerant circuits
can increase up to values such as to open the safety valve .
Packing removing
Recycle and dispose of packing material in conformity with local regulations, be extremely careful not to damage the unit .