Optima 01 Range
Domina, Modena and Falcon (MF02)
Step 1 Remove clock from control panel.
Step 2 Swap wiring as shown. Make sure Live is connected to terminal 1 (wire
colour is not conclusive of polarity)
Step 3 Fit receiver into control panel.
Note. If the Radio thermostat clock is going to replace the existing room thermostat
this must be linked out on the room thermostat terminal block.
Radio
Thermostat
Clock Receiver
Universal
Digital
Clock
4 3
2
1
5 3
2
1
Step 1 Remove clock from control panel.
Step 2 Swap wiring as shown. Make sure Live is connected to terminal 1 (wire
colour is not conclusive of polarity)
Step 3 Fit receiver into control panel.
Note. If the Radio thermostat clock is going to replace the existing room thermostat
this must be linked out on the room thermostat terminal block located in the electrical
compartment on the underside of the boiler.
Radio
Thermostat
Clock Receiver
Universal
Digital
Clock
4 3
2
1
5 3
2
1
5
Summary of Contents for 30800013
Page 14: ...14 Notes...
Page 15: ...15 Notes...
