Ferroli 0T4D1AWA, Instructions For Use, Installation & Maintenance

Page: 18 / 61

313
EN
cod. 3541V481 - Rev. 00 - 06/2021
Curve: select this item and use the buttons
and DHW to adjust the de-
sired curve from 1 to 10.
By adjusting the curve to 0, the slid-
ing temperature adjustment is disa-
bled (see fig. 24).
Offset: Access this sub-menu to access par-
allel offset of the curves using the
buttons
and DHW . Refer to
fig. 25 for the characteristics.
OFF: This item gives access to the "exter-
nal temperature shutdown” value.
Use the buttons
and DHW to
modify the value (from 0 to 40°C), if
set to 0 the function is disabled. Igni-
tion occurs when the temperature of
the external probe is more than 2°C
lower than the set temperature.
fig. 23
To exit the Climatic curves setting [OTC] menu, press the button repeatedly until reaching
the main screen.
If the room temperature is lower than the desired value, it is advisable to set a higher order curve
and vice versa. Proceed by increasing or decreasing in steps of one and check the result in the
room.
fig. 24- Compensation curves
fig. 25- Example of compensation parallel
curve offset