·
Functions
Operating mode selection: Present man or Automatic. Automatic
recognizing and evaluation for safety edge’s status.
Adjustable waiting time up to 90 sec. The door will be closed once the programmed time
finished.
Input for pull cord or remote control.
Input for intermittent indicator light or Traffic Light
. Slot for magnetic detector included.
Connection time adjustment for the motor break.
Input for the 3º micro switch of the limit switch.
Input for operating through frequency
inverter. LEDS status information.
Enclosure with Motor Circuit Protector, inversor and motherboard.
The operating door is impossible without original traction motor and
electrical control box.
·
1.2. Electrical security device
Before each descent movement, an internal test is done on the photocell and the electrical
control box (security category Nº2 according to the DIN EN-954-1 rule). In case of technical failure,
and for security reasons, the door will be automatically rolled up. If the contact of the safety edge
is damaged, the door will be also automatically rolled up for security reasons.
Photocell and safety edge must to be controlled per authorised staff each year.
·
1.3. Motor
The Folding up door is electrically activated through a motoreductor allowing the door to
operate is placed on the superior part of this one, being indistinctly installed on the right or
the left side according to the installation requirements. If there is no enough space for the
installation of the motoreductor, it is always possible to place it in frontal position with a
chain. The electrical control box includes a motor protector allowing to disconnect the
motor’s supply in case of over temperature of this one.
7