
IMPORTANT APPENDIX
In accordance with the low voltage European directive, we inform you regarding following
requirements:
-
For equipment permanently connected, it must be incorporated in the wiring a
disconnection device, easily accessible.
-
It is obligatory to install this equipment in vertical position and to firmly fix the frame to
the building.
-
This equipment only can be manipulated by a specialized installer, by your maintenance
personnel or by an operator properly trained.
-
The instruction manual of this equipment must always remain in the user’s possession.
“The CE mark placed in this equipment means that its fully in accordance with requirements
indicated in electromagnetic compatibility 89/336/CEE directives and low voltage
73/23/CEE standard and its later 93/68/CEE modification.”
·
4.5. Operating mode tests
Once all door components connected, you must test all security and activation systems.
The door can operate in Present man or Timer mode.
The connection to supply external devices:
·
230V (400V / with N mains), up to 1A (maximum consumption)
·
24 VDC, up to 150mA
Note: The operating tests must be always done by qualified staff and always after to adjust
limit switches and to connect security systems previously disconnected for up and down
adjustments. The assembly area are must be cleaned after the door installation.
·
4.6. Adjustment and Starting
Activate the door pressing push buttons and verify that movement ways are correct.
If necessary, change the movement way. Modifying the phase’s sequence, on cables
line placed before the general switch.
Check the security device is correctly operating. Otherwise, the door can wrongly operate.
·
4.7. To dismantle
To dismantle this door, you have to proceed in the opposite order that for the assembly.
·
4.8. End of the assembly
The packaging material can be returned to the manufacturer. Defective pieces have to be recycled
by the customer in order to preserve the environment and to be in accordance with the present
law. Defective electronic pieces have to be separately treated according to the valid law.
25