Not for
Reproduction
Lubrication
This unit is equipped with twenty four (24) different grease
fittings that must be lubricated on this unit. They must be
lubricated at the intervals as specified in the
Maintenance Chart.
Qty of
Fittings
Grease fitting Location
1
Forward Speed Control Lever Rod (A, Figure 17)
2
Drive Lever Pivots (B)
8
Grease-able Ball Joints (C)
1
Forward Speed Indicator Pivot (A, Figure 18)
1
Parking Brake Pivot (B)
2
Frame Rails (A, Figure 19)
4
Deck Adjusters (B)
3
Mower Deck Spindles (A, Figure 20)
2
Front Caster Wheel Axles (See
Lubricating the Front Casters)
(A, Figure 21)
N/A
Front Casters (See
Lubricating the Front Casters)
Not all greases are compatible. Red grease (p/n 5022285) is
recommended, automotive-type, high-temperature, lithium
grease may be used when this is not available.
Oil Application Locations
Operator presence flap pivots (D, Figure 17)
Neutral return pedal pivots (E)
Deck Lift Crank Pivots (F)
Control Rod Pivots (G)
Lower Parking Brake Rod Pivots (H)
Deck Lift Linkage Rods (C, Figure 19)
Deck Lift Trunnions (D)
Discharge Chute Rod Hinge (B, Figure 20)
Generally, all moving metal parts should be oiled where contact
is made with other parts. Keep oil and grease off belt and
pulleys. Remember to wipe fittings and surfaces clean both
before and after lubrication.
17
18
22