FERNO/MAN/0721/216-R22/UK
25
Keeping the release lever held, push the cotside slightly forward,
then back towards you until you reach the position required, then
move back up slightly to lock the cotside at that ratchet position.
A click will be heard when the cotside locks into place.
Whilst holding the top of cotside, grip and squeeze the red
release lever upwards.
6.32 - Adjusting Optional SX cotsides
The SX cotsides can be easily moved to the various ratchet angles
by use of the red cotside release lever, which is located in the
centre of the cotside, directly underneath the red "X" graphic.
SX cotside release lever
Squeeze the release lever
Moving the SX cotside to the required position
Alternatively the SX cotside can be moved fully down, and then
after releasing the red handle, move the cotside back up to the
required position. As the cotside is moved up a click can be heard
as it goes past each ratchet position. Once at the required position,
and clicked in place, pull the cotside back down again to ensure it
is indeed locked in place.
Moving SX cotside whilst depressing lever
Bring SX cotside past horizontal
Release lever and move SX cotside back up to
required position
6 - OPERATING THE TROLLEY FEATURES
Operating the Trolley Features
Summary of Contents for POWER X SN-POW1001
Page 48: ...FERNO MAN 0721 216 R22 UK 48...
Page 50: ...FERNO MAN 0721 216 R22 UK 50...
