FERNO/MAN/0721/216-R22/UK
42
8.6 - Unloading the Trolley From a
Vehicle Fitted with a Tail Lift
1. Make sure that the patient is disconnected from any vehicle
mounted apparatus or instrumentation.
2. Operation by a minimum of two operators at all times.
3. Disengage the trolley from the two part locking device by
depressing the foot pedal, and roll the trolley to the rear of
the ambulance compartment.
4. Guide the trolley onto the tail lift and out of the vehicle.
5. Operate the tail-lift as per the manufactures instructions.
6. Lower the tail-lift to the ground and move trolley forward
clear from the tail-lift
8.7 - Fastening POWERX in a vehicle
POWERX is compatible and has been tested with the Ferno
range of 2-part locks, including NMI and Unwin track locks and
SlideLock, and has been dynamically crash-tested to EN 1789 and
CEN certified.
8 - PREPARING TO MOVE THE TROLLEY
Trolley Locking Devices
Head-end lock spike fixing U bracket
Foot-end lock fixing bracket
9.1 -LOCKING DEVICES 2-Part Lock
Locking devices available for use with POWERX include:
1. Standard floor-mounted Ferno 2-part lock
2. NMI floor-track mounted 2-part lock
3.Unwin floor-track mounted 2-part lock
4. Ferno SlideLock 2-part lock with adjustable floor positioning
All have been dynamically crash-tested to BS EN 1789 and
CEN certified when used in conjunction with Ferno UK's range
of ambulance trolleys, Falcon, Pegasus, Megasus, Harrier and
POWERX.
Combining different manufacturers’ products into a “mixed-
component” trolley/fastener system can increase the user’s risk
of injury and damage if not checked first for compatibility.
However, Ferno trolleys are designed to be compatible with the
Ferno range of Two-Part locking devices or competitors equivalent
locking devices, giving full compatibility and interchangeability
across your vehicle fleet.
Ferno 2-part NMI Track lock
Ferno Standard 2-part Lock
Summary of Contents for POWER X SN-POW1001
Page 48: ...FERNO MAN 0721 216 R22 UK 48...
Page 50: ...FERNO MAN 0721 216 R22 UK 50...
