Ferno POWER X SN-POW1001, User Manual

Page: 20 / 50

FERNO/MAN/0721/216-R22/UK
20
6.22 - Backrest Defib monitor hook
(Option)
A defib monitor can be hooked to the rear of the backrest whilst
moving POWERX outside of the ambulance. Simply place the
monitor onto the hook and close by pulling the fixing bar down
until it clicks in place, ensuring that the fixing pin is located in
the fixing pin hole. To remove, pull pin out, lift the fixing bar and
remove the monitor.
Zoll X-Series defib held on backrest hook
6.21 - Head-end Storage Net (Option)
A storage net is available for POWERX, which attaches to the trolley
frame at the head-end below the backrest, allowing lightweight
items such as documents and patient's belongings to be stowed
whilst moving a patient outside of the ambulance.
For safety reasons it should not be used for storage of items whilst
travelling inside an ambulance. All equipment and articles inside
the back of a vehicle must be safely secured on an appropriate
crash-tested bracket or in a cupboard to avoid them becoming a
projectile in the event of a vehicle crash.
Storage net on head-end trolley frame
6 - OPERATING THE TROLLEY FEATURES
Operating the Trolley Features
For more information on the head-end
storage net please also refer to the Storage
Net User Manual, reference 234-3590-01,
which is available from Ferno.
Note that the backrest hook is not designed to hold equipment
whilst moving in a vehicle. It is only intended as a place to
temporarily hold the monitor when transferring a patient from
scene of incident to vehicle, and then once at destination,
from out of the vehicle to hospital admissions. When inside the
ambulance, any equipment must be moved off the backrest
holder and placed in a CEN complaint crash-tested bracket, such
as Ferno's IPTS iNTRAXX wall track and equipment bracket system.
Ferno's IPTS iNTRAXX wall track bracket system
Hook and fixing bar on backrest
Pull side button to release fixing pin