© Ferno-Washington, Inc. 234-3413-00 June 2009
5
Mini Cot
1.5 Safety and Instruction Labels
Safety and instruction labels place important information from the users’ manual on the cot.
Read and follow label instructions. Replace worn or damaged labels immediately. New labels are available from EMSAR , page
20) or from your distributor.
The labels below are affixed to the cot.
Safety Information, Symbol Glossary
Location: Operator end of the cot.
●
This label identifies the cot, displays important
●
Warning symbols (see
Symbol Glossary
, page 4)
and provides important reminders about operating
the cot.
Located: Loading-wheel cross tube.
●
Reminds operator and others to take precautionary
●
measures when activating the spring-loaded loading-
wheel assembly.
This label does NOT contain complete instructions
for loading and unloading the cot. The label is NOT a
substitute for reading this manual and practicing with
the cot before using it in service.
L o c a t i o n :
●
S a f e t y -
lock lever
beneath the
platform on the operator's right-hand side of the cot.
Reminds operator to press in on the safety lock to
●
disengage it.
The number "2" on this label corresponds to the
●
number "2" panel on the main instruction label.
Important
Location: Base
●
of the right-
hand
control
handle.
Reminds operator that squeezing this control handle
●
operates the front legs of the cot.
The number "3" on this label corresponds to the
●
number "3" panel on the main instruction label.
Location: Loading-wheel release lever at
●
the operator end of the cot.
Label reminds the operator to extend the
●
loading-wheel assembly before loading the cot into a
vehicle.
The number "1" on this label corresponds to the number
●
"1" panel on the main instruction label above.
Location:Base
●
of the left-hand
control handle.
Reminds the
●
operator that squeezing this control handle operates the
rear legs of the cot.
The number "4" on this label corresponds to the number
●
"4" panel on the main instruction label.
