Ferno Mini Cot User Manual Download Page 4

4

© Ferno-Washington, Inc.   234-3413-00  June 2009

Mini Cot

1 - SaFety INForMatIoN

1.3  bloodborne Disease Notice

To reduce the risk of exposure to bloodborne diseases such 

as HIV-1 and hepatitis when using the Mini Cot, follow the 

disinfecting and cleaning instructions in this manual.

Safety Information

1.2  Important

Important notices emphasize important usage or maintenance 

information.

Important

1.4  Symbol Glossary

The symbols defined below are used on the cot and in this 

users’ manual. 
Ferno uses symbols recognized by the International Standards 

Organization (ISO), American National Standards Institute 

(ANSI), and the mortuary services industry.

Load Limit

Read the  

Users’ Manual

General Warning of 

Potential Injury

Cot May Be Operated by 

One Trained Operator

1.1  Warning

Warning notices indicate a potentially hazardous situation 

which, if not avoided, could result in injury or death.

 

WarNING

Untrained operators can cause injury or be injured. Permit 

only trained personnel to operate the cot.
Improper use of the cot can cause injury. Use the cot only 

for the purpose described in this manual.
Modifying the cot can cause injury and damage. Use the 

cot only as designed by Ferno.
Improper operation can cause injury. operate the cot only 

as described in this manual.
Squeezing the control handles while UNLoaDING the cot 

will prevent the legs from locking and will allow the cot 

to fold. Grasp only the cot main frame, not the handles, 

while unloading the cot.
an unrestrained body can fall off the cot. Use restraints to 

secure the body on the cot.
Improper maintenance can cause injury. Maintain the cot 

only as described in this manual.
Improper  parts  and  service  can  cause  injury.  Use  only 

Ferno parts and Ferno-approved service on the cot.
attaching improper items to the cot can cause injury. Use 

only Ferno-approved items on the cot.

300 lb

136 kg

R

Summary of Contents for Mini Cot
























Reviews: