manualshive.com logo in svg

Ferno Integrated Patient Transport & Loading System iNX, User Manual, Page: 6 / 68

Share
Download
Ferno Integrated Patient Transport & Loading System iNX User Manual Download Page 6

6

© Ferno-Washington, Inc. / 234-3622-06 / March 2019

Safety Information

SAE J3027 Compatibility

To comply with the SAE J3027 Recommended 

Practice, all three elements are required. 

● 

Compliant ambulance cot

● 

Compliant restraint system

● 

Compliant fastening system (cot/litter 

retention system) 

1.7  Safety and Instruction Labels

Safety and instruction labels place important information from the users’ manual on the iN∫X. Read and follow label instructions. 

Replace worn or damaged labels immediately.

Safety Reminders

Location: Control and Loading Ends

Safety Reminders

Location: Control and Loading Ends

Do Not Open/Laser Notice

Location: Controller Housing

Ferno Battery Only

Location: Battery Cradle

Sidearm Unlock Labels (2 ea.)

Location: Sidearm

Non-Powered Operation

Location: Actuator-Release Handles (2)

Do Not Open

Location: Display Bottom

Laser Emitter Warning (2)

Location: Laser Apertures

Non-Powered Operation

Handle Lock/Unlock (2)

Location: Handle Mounts

Pinch Point

Location: Actuator Sliding Surface

1.8  Compliance: USA Standard 

 

SAE J3027

The 

iN∫X® with iN∫LINE® 

is compatible with the Society of 

Automotive Engineers SAE J3027 Recommended Practice 

(2014)

 

when used with additional Ferno equipment (not 

supplied, available separately).
To comply with the SAE J3027 Recommended Practice (USA), 

all three compliant elements must be present

:

1.  Ambulance cot
2.  Transport restraint system (patient restraints)
3.  Fastening system (cot/litter retention system)

FERNO COMPLIANT ELEMENTS

● 

iN∫X® Integrated Patient Transport & Loading System™ 

● 

iN∫LINE® Fastening System (Short, Medium, or Long)

● 

Model 417-3 iN∫X® Restraint System

Summary of Contents for Integrated Patient Transport & Loading System iNX





































































Reviews:

No comments