© Ferno-Washington, Inc. / 234-3622-06 / March 2019
33
Using the iN∫X
5.4 Powered Extending/Retracting
Extending or retracting the legs with a patient on the iN∫X requires
a minimum of two trained operators who are communicating,
working together, and maintaining control of the iN∫X at all times.
1.
Both Operators:
Keep both hands on the iN∫X main
frame. Maintain control of the iN∫X so it does not shift
when extending or retracting the legs.
2.
Control Operator:
Press to activate the iN∫X after
turning the power ON, or to awaken the iN∫X from
Sleep Mode.
3.
Control Operator:
Press or (Figure 32) until the
iN∫X reaches the desired height.
4.
Both Operators:
During the position change, both
operators (and any helpers) move with the iN∫X and
maintain their grasp on the main frame.
Note:
The color of the display zone assists the operators in
understanding the height condition of the iN∫X. See “Display
LOAD CAPACITY
The iN∫X load capacity is 700 lbs/318 kg. Extremely heavy
loads may require assistance from the operators (and any
helpers). See “Using Additional Help” on page 10.
If the iN∫X will not extend the legs, do the following:
1.
Both Operators and Helpers:
Trained operators stand at
opposite ends of the iN∫X and use an underhand grip to
grasp the main frame. Guide helpers where and how to
grasp the iN∫X. See “Using Additional Help” on page 10.
2.
Control Operator:
Press and tell the Loading-end
Operator and helpers to help raise the iN∫X.
Allow the iN∫X to lift the load. The operators and
helpers need to provide lift-assistance only for the
portion of the load that exceeds the load capacity.
3.
Both Operators and Helpers:
Together, raise the iN∫X
to the desired height, then hold the iN∫X at that position.
4.
Both Operators and Helpers:
Slowly lower your
hands to test and verify that the iN∫X has stabilized at
the new position. Always keep both hands on the main
frame and control the iN∫X.
Press Green to Go
To wake the iN∫X from Sleep Mode, press .
Automatic Stops
The iN∫X automatically stops at the:
●
factory-set maximum transport height
●
user-set loading height
To continue, press or .
Providing Lift-Assistance
Allow the iN∫X to lift the load. The operators
and helpers need to provide lift-assistance
only when the load exceeds the load
capacity.
Auto-Equalize Feature
When or is pressed, the iN∫X extends or
retracts one set of legs until both sets of legs
are equally extended. Then, both sets of legs
extend or retract simultaneously.
32
Buttons (2 sets)
Extend Legs
Retract Legs
WARNING
Uncontrolled movement can cause injury or damage.
Support and control the iN∫X at all times.
NOTICE
Operators must maintain a firm grasp on the main frame
and control the iN∫X at all times. Be prepared to help raise
or lower the iN∫X.