Ferno Integrated Patient Transport & Loading System iNX User Manual Download Page 13

Page: 13 / 68

General specifications are rounded. Metric conversions are calculated before

rounding. Ferno reserves the right to change specifications without notice.

Height:

Distance from the ground to the patient surface.

Loading Height:

Distance from the ground to the bottom of the loading wheels.

Weight

includes battery weight but is without mattress, patient restraints and

optional features.

Integrated Charging System

Maintains the battery charge when the iN

∫

X is secured

in the iN∫LINE. See “Integrated Charging System (ICS)” on page 21.

Note:

The locking patient mattress is sealed.

3.2 General Specifications

iN∫X Construction

Frame

Aluminum

Legs

Carbon-Fiber Composite

Bed Surface

Aluminum

Wheels

Stainless steel, sealed bearings;

Nonconductive wheels

Position Indicator Lights

Class 2M Laser

Power System

Operating Temp.

-40°F to 131°F (-40°C to 55°C)

Battery Output

36 Volts DC

Charging Time (1 transport,

charge maintained by ICS®)

As little as 15 minutes

Charging Time (depleted)

Up to 1 hour, 45 minutes

Charger Input

100 – 240 Volts AC

Charger Output

Up to 39.6 Volts DC, 2 Amps

(for iN∫X LiFePO4 battery)

Load Capacity

Imperial/Metric

700 lbs/318 kg

Stone (UK)

50 st

Weight

Equipped for Ferno®

iN∫LINE® Series Fastening System

203 lbs/92 kg

∫

X Overview

Dimensions

Imperial

Metric

A) Wheels

6" x 1.7"

152 mm x 43 mm

B) Length (Adjustable)

63" – 81"

1594-2045 mm

C) Width (Overall)

24"

597 mm

D) Width (Patient Surface)

16"

406 mm

E) Height

(Adjustable)

14" – 49"

356-1245 mm

F) Maximum Transport height (Factory-Preset, measurement is to patient surface)

34"

864 mm

G) Loading Height

(Adjustable, measurement is to bottom of loading wheel)

35" Maximum

889 mm Maximum

H) Backrest Adjustment

0°–76°

I) Shock Frame Adjustment

0°–16°

Soft Goods

Mattress

72.5"x16.5"x3"/1842x419x73 mm

Summary of Contents for Integrated Patient Transport & Loading System iNX





































































Search results

Summary of Contents for Integrated Patient Transport & Loading System iNX

Reviews:

Ferno Integrated Patient Transport & Loading System iNX, User Manual, Page: 13 / 68

Search results

Summary of Contents for Integrated Patient Transport & Loading System iNX

Reviews: