© Ferno Australia / 00425-V1 / Aug 2018
6
INDUSTRIPOD® FEATURES
●
Rectangular, adjustable legs with quick-action ball lock leg pins
●
One-piece fabricated steel head
●
One stainless steel M12 swivel eyebolt anchor point
●
Three side plate anchor points
●
Three tie-off points for rigging or stabilisation
●
Adjustable feet with aggressive non-slip tread pattern
●
Adjustable foot tether
INDUS FEATURES
●
Rectangular, adjustable legs with quick-action ball lock leg pins
●
One-piece fabricated steel head
●
Two stainless steel 70 mm sheave pulleys allow two devices via
cable or rope to be attached simultaneously
●
Pulley detent pins to prevent rope / cable jump
●
Three side plate anchor points
●
Three tie-off points for rigging or stabilisation
●
Adjustable feet with aggressive non-slip tread pattern
●
Adjustable foot tether
Plan View of IndustriPOD® with Legs at Full Extension
2.2 Specifications
Specifications for the IndustriPOD® series tripods are shown in the table. General specifications are rounded.
SPECIFICATIONS
IndustriPOD®
Indus
DESIGNATION
Tripod for securing persons who access or work in confined spaces where a fall from height may
occur. Not intended or to be used for lifting equipment.
WEIGHT
23 kgs
25 kgs
HEIGHT - Minimum
1650 mm
1750 mm
HEIGHT - Maximum
2465 mm
2565 mm
FOOT PRINT - Inside diameter of feet
2187 mm
2187 mm
FOOT PRINT - Outside diameter of feet
2523 mm
2523 mm
SAFE WORKING LOAD (SWL)
•
550 kg off M12 stainless steel eyebolt
•
360 kg off side plate anchor points
•
220 kg pulley over leg
•
360 kg off side plate anchor points
RATING
2 Person Rescue / 1 Person Working
(21kN)
2 Person Rescue / 1 Person Working
(21kN)
TRIPOD CONSTRUCTION
Steel, aluminium and stainless steel
Steel, aluminium and stainless steel
STANDARD FOOT TREAD
Polyurethane
Polyurethane
LEG STOPPERS
Polyurethane
Polyurethane
PULLEY HEAD PULLEY SPACERS
Acetal
SUPPLIED IN THE BOX
•
IndustriPOD® Tripod
•
Adjustable Foot Tether (1)
•
User Instruction Manual
•
Indu® Tripod
•
Adjustable Foot Tether (1)
•
User Instruction Manual
WORKING LIFE
Refer to statement on page 4.
Ø 2187 mm Inside Feet
Ø 2523 mm Outside Feet
ABOUT THE PRODUCT
2.3 Compatible Components
The use of the IndustriPOD® is limited to combinations of approved and
registered components only. Examples include:
1. Retractable type fall arrestor with rescue winch according to EN360.
2. Rescue, lifting and descending devices according to EN361, EN341,
EN1496, EN67, EN1891, EN1497 and any other relevant Standard
pertaining to the task that is to be completed.
3. Approved and tested componentry by Ferno Australia.
Other combinations and components not meeting these standards
should not be used as they may compromise the safe operation of the
system.
