manualshive.com logo in svg

Ferno 24 MAXX, User Manual

Share
Download
Ferno 24 MAXX User Manual Download Page 27

27

© Ferno-Washington, Inc   234-3307-04   May 2011

24•MAXX®, 24•miniMAXX®, 24H•miniMAXX®

Maintenance

7.7  lubricating the Cot

Disinfect and clean the cot before applying lubricant. Use 

the lubricants designated below. Do not lubricate points 

marked with the “Do Not Lubricate” symbol.
The lubrication points are the same for the Model 24-MAXX, 

Model 24-miniMAXX, and Model 24H-miniMAXX cots.

Do not lubricate

lubricate

Leg Joints

4

Illustration at Left Shows Top-Down 

View with Bed Surface Removed

Steel Rod 

(inside spring)

3

I-Beam

2

1

1

1

Release-Handle 

Hinges (7)

1

important

Lubricating parts that should not be lubricated allows 

dirt and foreign particles to collect on those parts, 

resulting in damage. Lubricate 

only

 the numbered 

reference points shown.

lUbriCaTiOn pOinTs 

  (Use a small amount of lubricant)

Reference # 

Location 

# of Points 

Lubricate With

 

Release Handle Hinges 

7 

WRL-191-S or EZ-1 synthetic lubricant 

 

I-Beam 

1 

White lithium grease

 

Steel Rod (inside leg-return spring) 

1 

WRL-191-S or EZ-1 synthetic lubricant

 

Leg Joints 

4 

WRL-191-S or EZ-1 synthetic lubricant

 

Wheels (sealed bearings) 

0 

Do not lubricate

 

Upper Leg Pivot Points 

0 

Do not lubricate

1

3

2

4

Summary of Contents for 24 MAXX
































Reviews:

No comments

Brands by name

Popular brands

Load more brands