26
© Ferno-Washington, Inc 234-3307-04 May 2011
24•MAXX®, 24•miniMAXX®, 24H•miniMAXX®
7.6 inspecting the Cot
Have your service’s equipment maintenance personnel
inspect the cot regularly. Follow the checklist at right and
operate the cot through all its functions as described in this
manual.
If the inspection shows damage or excessive wear, remove
the cot from service until repair is made. See
Parts and
Service,
pages 28-30.
Maintenance
7.5 Waxing the Cot
While it is not necessary to wax this cot, waxing the
aluminum main frame or the painted legs will not damage
them, and will help maintain the cot’s appearance.
Disinfect and clean the cot before applying wax. Use an
automotive wax as directed by the wax manufacturer.
inspeCTiOn CheCklisT
●
Are all components present?
●
Is the cot free of excessive wear?
●
Are all screws, nuts, bolts, rivets, and roll pins
securely in place?
●
Do all moving parts operate smoothly and properly?
●
Does the cot lock properly into each position?
●
Does the cot load and unload properly?
●
Does the cot roll smoothly?
●
Do the wheels have some tread?
●
Do the wheel locks engage properly and stop wheel
rotation?
●
Is the mattress in good condition?
●
Are the restraints properly installed?
●
Is restraint webbing in good condition with no cuts
or frayed edges?
●
Are restraint buckles free of visible damage and do
they operate properly?
●
Do installed accessories operate properly without
interfering with cot operation?
●
Is the vehicle properly prepared for the cot with an
approved Ferno cot fastener installed?
