Fermax PBX CAM, User And Installation Manual

Page: 27 / 42

The same command can be set for both switches, then they are activated at
the same time. The advantage is to set the same command both for switch
closing and command to guard hanging up (
parameter 43
)
aa=bb
.
List of related parameters:
31 36 37 38 43 8# 83
Parameter Value Meaning Basic
36 r ss
ss
period [sec] of
r
switch closing 105 205
r
– switch number [1-2]
ss
– duration of switch closing [2 digits 01-99]
List of related parameters:
31 32 33 34 35 37 38 8# 83
Parameter Value Meaning Basic
37 r p r
switch control by incoming call
11 21
r
– switch number [1-2]
p
– parameter, if
p=1
allowed or
p=0
prohibited to control the switch during
incoming call.
To prohibit the control during incoming call is important e.g. when using switch
2 in mode 1 for control of garage gate opening, when the electronics opens the
gate and the gate is closed by car passage. Then the control from phone could
undesirably cause the permanent gate opening (not closed – no car passage).
List of related parameters:
31 35 8# 83
Parameter Value Meaning Basic
38 xx
xx
period [sec] between switches 1 and 2
closing
10
xx
– time between close switches 1 and 2 by
m=5
mode setting (gradual
opening) [2 digits 01-99]
List of related parameters:
31 32 33 34 35 36 37 8# 83
4.3 Basic Parameters
Parameter Value Meaning Basic
41 v
choice type
v
– tone / pulse 0
v
– choice type
v=0
is DTMF tone choice,
v=1
is pulse choice
List of related parameters:
1 2 8# 84