This function allows you to view any DUOX command transmitted by any device on the
installation.
These commands are stored in the programmer's internal memory, up to a maximum of
100 entries.
To capture the commands, follow these steps indicated in the diagram:
COMMAND ANALYSER MODE (IM)
We start from option 2 ANALYSER from the MAIN
MENU
The device remains available to receive commands.
WAIT COMMAND blinks.
Return to the main menu.
Review the
commands registered
via the arrows
A command is made…
The command appears on the display and is saved in the
memory.
In the bottom linte the origin and destination adresses
appear, sespectively.
A new command is
made
Full memory (100
commands)
Upon reviewing the stored entries, the last command registered appears first.
Some commands are sent several times a day as a security measure up against a loss
of data, all remaining registered.
The contiguously repeated commands are shown alternating a dash (-) and asterisk (*)
Review the
commands registered
via the arrows
* * * * *
WAIT COMMAND
2. ANALYZER
ESC
OK
MEMORY FULL
OK
OK
DISABL-CHANNEL 1
00F010 - FFF0FF
DISABL-CHANNEL 1
00F010 - FFF0FF
DISABL-CHANNEL 1
00F010 - FFF0FF
