This menu allows you to select the device or range of devices that we want to detect.
A device is detected as long as it is properly installed in any point of the installation in which
the programmer is connected, and with its address properly programmed, for the case in
which the device requires it.
The detectable devices are:
- Telephones
- Relays
- Panels, either general entrance, block or sub-block
- Guard units, whether for the general entrance or block
Starting from the MAIN MENU, continue the following diagram to access the device type
you want to detect.
DETECTING DEVICES (IM)
We start from DETECTOR selection from the main
menu:
Access the DETECTING TELEPHONES function
Exit this selection and return to the MAIN MENU.
Access the DETECTING RELAYS function
Access the DETECTING PANELS function
Access the DETECTING GUARD UNITS function
1. DETECTOR
TELEPHONE
1. DETECTOR
1. DETECTOR
RELAYS
1. DETECTOR
GUARD UNIT
1. DETECTOR
PANELS
OK
ESC
OK
OK
OK
OK
