This function allows for the detection of any type of panel installed in the installations where
we have connected the DUOX programmer.
However, we must indicate what type of panel we want to detect, between:
- A panel configured as a BLOCK entrance.
- A panel configured as a SUB-BLOCK entrance.
- A panel configured as a GENERAL
Starting from the MAIN MENU, continue the following diagram to access the device type
you want to detect.
DETECTING PANELS MENU (IM)
Access the BLOCK PANEL DETECTION
We start from the PANEL DETECTION option from the
DEVICE DETECTION menu
Exit this function and return to the DEVICE DETECTION menu
Access the SUB-BLOCK PANEL DETECTION
You access the GENERAL ENTRANCE PANEL
DETECTION
1. DETECTOR
PANELS
OK
ESC
OK
OK
1. DETECTOR
BLOCK PANEL
1. DETECTOR
SUBBLOCK PANEL
1. DETECTOR
GENERAL ENTRANCE
OK