Cod. 970077b V04_21
14 | 16
Fig. 7 Setting up FPAC-MAX FINGERPRINT READER in AC-MAX HW software
Firmware Update Procedure (AC-MAX HW)
1.
Select the command Tools in the top menu of the AC-MAX HW software, and then select
Update
Firmware.
2.
In the opened window, select the AC-MAX Fignerprint READER firmware file (extension
*.frg) with the Select
File button
3.
Select the
button
Update in order to upload the firmware to FPAC-MAX FINGERPRINT
READER
The FPAC-MAX Fingerprint READER maintains all of its settings (including IP address) after
firmware update.
Note: If you do not know the current IP of your fingerprint reader you can reset the reader to
factory settings.
