12
•
ENABLE:
Check this box if the SIP monitor is to be used as a SIP-based terminal.
•
SIP SERVER:
Enter the name or IP of the SIP server
•
DOMAIN
: Enter the domain of the SIP server
•
STUN IP:
Used for the configuration of large installations based on fibre optic links.
Check with your network administrator.
•
STUN PORT:
Used for the configuration of SIP server-based installations. It is
usually port 5060. Check with your network administrator.
•
USER:
Enter the SIP user number
•
SIP PASS:
Enter the SIP server user PASS
.
NOTES:
Before programming the monitors, it is necessary to plan the installation with the following
criteria:
•
Assign a unique IP to each element of the installation (including the PC where the
MEET Management Software is installed, if any).
•
All IP addresses must be in the same range.
•
The LAN to be used must have an internet connection (if call forwarding to mobile is
required) and be correctly configured.
Consult your LAN administrator if you have any questions regarding the configuration of
network parameters.
