14
•
MODES:
Select the MODES in which you want each of the zones to be active, according
to the type of sensor and the installation carried out.
•
LOOP DETECT:
Select this box if you want the system to monitor the status of the
sensors every time you select NIGHT or OUT from the HOME mode.
In the event that a sensor in the NIGHT or OUT zones is activated, the user will be
warned by a message on the screen. It will not be possible to change the mode until the
incident has been corrected.
This makes it possible, for example, to avoid false alarms or security failures, if a door or
window is left open at the time that NIGHT or OUT mode is selected.
4.4
Enable/disable FUNCTIONS
Touch the icon
to select which functions are to be available to the user and which
functions are to be blocked.
In the case of disabled functions, the corresponding icon will appear on the screen, but its use
will be blocked, and a message will appear. “FUNCTION DISABLED”.
