18
The default identification data may have been changed from the local programming of the
monitor.
5.1
DEVICE
Provides some technical information regarding the equipment, as a reference.
FIRMWARE
: Version of the installed firmware
DEVICE:
Block-Apartment No.-Monitor No.
MAC
: Monitor MAC number
IP:
IP address assigned to the monitor
5.2
GENERAL
Allows the configuration of the identification parameters of the monitor within the installation.
BLOCK:
Block number of the apartment where the monitor is installed. 3 digits (001-009).
APART
: Number of the apartment where the monitor is installed. 4 digits (0001-9899).
MONITOR
: Number (from 0 to 9) assigned to each of the monitors installed in the same
apartment, if there are several. If there is only one, leave the default value "0".
SYNC CODE:
Synchronisation code with the rest of the monitors installed in the same
home. It has to be the same in all of them. Default 123456
Enter the corresponding parameters and click on SAVE to confirm.
NOTE:
Before setting these parameters it is necessary to plan the installation (installation project)
in advance, considering the configuration of all the devices.
