Ferlux AROA 10, Manual

Page: 36 / 48

36
LACK OF CLEANING CAN AFFECT THE SAFETY AND CORRECT
OPERATION OF THE HEATER
BEFORE TURNING ON THE HEATER, MAKE SURE THAT THE
BRAZIER IS PROPERLY SEATED IN POSITION
TO CARRY OUT THE CLEANING AND MAINTENANCE TASKS, IT IS
NECESSARY THAT THE HEATER BE DISCONNECTED FROM THE
MAINS POWER SUPPLY, FULLY TURNED OFF, AND COLD
AFTER A LONG PERIOD OF DISUSE, EMPTY THE PELLET TANK OF
ANY REMAINING PELLETS SINCE THESE COULD HAVE ABSORBED
MOISTURE FROM THE AIR, CHANGING THEIR ORIGINAL
PROPERTIES AND MAKING THEM UNSUITABLE FOR USE
GENERALLY, IT IS NECESSARY TO CLEAN THE BRAZIER AFTER
10-12 HOURS OF CONTINUOUS OPERATION, ALTHOUGH A
HIGHER FREQUENCY COULD BE REQUIRED IF INFERIOR
PELLETS ARE USED
8.1 CLEANING THE BRAZIER AND BRAZIER HOLDER
According to the quality of the fuel, crusts may form that hinder the correct operation of the heater, meaning that they should
be removed from the brazier.
Lift the brazier up and clean these crusts and remove the ash, always taking care to unblock any holes that may have
become blocked.