15.
Configuration
Here you can find the complete settings / options available to configure your Regent i100. On the
main menu, navigate to Configuration setting. Press OK and you will see a list of options available.
Network
Wi-Fi Network
• Add / Remove AP
Add AP - It will scan out a list of routers around.
Remove AP - If you have already added a router and want to remove it, choose this option.
Note: Always bring the radio within 2 meters of the Wi-Fi router for setup.
• AP: [ ]
If you have added more than one router on the radio and want to switch to another one, select
this option to change.
• Signal
This is to show the strength of the Wi-Fi Signal of the Wi-Fi router as received by the radio.
Usually signal levels lower than -70dBm is at weaker level and if it affects the reception of your
radio, you may need to optimize the router location or check any problem of the router itself.
• IP
The IP is set Dynamic by default. Select to change Fixed IP according to your network
condition.
• DNS
The DNS is set Dynamic by default. Select to change <Fixed> DNS according to your network
condition.
Wi-Fi Channels
Not all of the Wi-Fi channels are available in every country. There may be variation between
different countries. Therefore it is necessary to choose the Wi-Fi channels to ensure the WiFi
performs satisfactory.
We have already set the channels according to the requirement in different countries. Choose the
country you are stay in from the list to get the correct channel.
Date and Time
The radio will set your local time automatically after the internet connection is completed. If you want
to do manual setting, change it by the following options:
• Time zone
Auto-set Time Zone: This option is set by default.
Manual-set Time Zone: Choose this option if you want to set the time in another region.
Choose and highlight the region/city you prefer and press OK to confirm.
Coupled with NTP (use network time) and DST (Daylight time saving) will
be adjusted automatically if you choose to use network time (NTP).
• Set Time Format
Choose either 12-hour or 24-hour notation you prefer.
• Set Date Format
• DST (Day Light Saving)
Enable on/off
• NTP (Use network time)
NTP is designed to synchronize a device's clock with a time server. Your radio will synchronize the
time server by default every time it powers up and connects to the Internet. This ensures a very high
degree of accuracy in the radio's clock. You can change to use other time server by inputting the
URL address (see below NTP server).
