Ferguson CF2000AT, Manual

Page: 12 / 26

also be modified. You can change this value in this way. Highlight this item,
then press key to active it. Use
keys to select desired location. By
pressing numeric keys or keys on the RCU, you can change the value of
desired location. After modifying well, press OK key to confirm, or press EXIT
key to cancel.
Mode: By pressing keys, set this item to be 2K, 8K or Auto.
Guard: Available options are: 1/4, 1/8, 1/16, 1/32 and Auto. Press keys to
select one of the available alternatives.
BandWidth: You have a choice of 6M, 7M, 8M. Press keys to select
appropriate bandwidth.
If there are items that you are not familar with,
please set them to default or auto. Once
OK
key is pressed, corresponding searching
window will be displayed on the screen. During
this process, new searched programs will be
listed in two columns labeled with TV or Radio.
Two dynamic bars reflecting the signal quality and the rate of process will also
be displayed.
1.3 Edit Channel
Select Edit Channel item in the Install menu
and press OK key. Then Edit Channel menu
will be displayed on the screen. From here,
new RF channel can be added and the existing
ones can be edited or deleted.
You can use the colour keys on the RCU to
execute the corresponding command.
Add (
Red colour key) Modify ( Green colour key)
Delete ( Yellow colour key) Search ( Blue colour key)
12