69
GETTING TO KNOW YOUR BELT
AND DISC SANDER
WARNING: To avoid injury from accidental start,
turn switch “OFF” and remove plug from power
source outlet before making any adjustments.
1. Work support. Supports the workpiece on the sanding belt.
2. Hex socket head screw. Loosening screw allows belt bed to be
raised to the vertical position.
3. Tracking knob. Turning knob counterclockwise causes sanding
belt to move towards the disc; turning knob clockwise causes
sanding belt to move away from the disc.
4. Tension lever. Sliding lever to the right releases the sanding
belt tension; sliding lever to the left applies belt tension.
5. Table lock knob. Loosening knob allows the worktable to be
tilted for bevel sanding (Scale pointer on table trunnion; scale
attached to base).
6. Auxiliary mounting hole. Allows table assembly to be mounted
for end sanding when the bed is placed in vertical position.
7. On-Off switch.
DISC
GUARD
1 WORK SUPPORT
WORKTABLE
ASSEMBLY
MOUNTING HOLE
SANDING
BELT
7 ON-OFF
SWITCH
SANDING
DISC
SANDING
PLATE
MOUNTING
HOLE
4 TENSION LEVER
WORK SUPPORT HEX
SCREW
5 TABLE
LOCK KNOB
BASE
3 TRACK-
ING KNOB
6 AUXILIARY
MOUNTING
HOLE
BELT
BED
2 BED
LOCKING
HEX SOCKET
HEAD SCREW
4. To lock switch in the OFF position, holding it down with one
hand and remove the key with the other.
WARNING!
For your safety, always lock switch in the
OFF position when not in use, remove the key and store
it in a safe place. If it were suddenly to become a power outage
(and all the lights go out), way switch in OFF position, remove
the key and store it at a safe distance from the grinding machine.
SWITCH WITH ON / OFF MODE
(May vary from country to country).
ON / OFF power switch has a lock function. This function is to
prevent the machine should be used by unauthorized persons,
CHILDREN AND OTHERS
1. In order to start the machine, the keys should be in power, see
sketch.
NOTE!
The key is made of yellow plastic and is in the bag with
loose parts.
2.
drag the lever toward you.
3. To switch the machine, push the lever.
NEVER LEAVE MACHINE UNATTENDED UNTIL IT IS
JUST STOP.
Place a finger behind switch lever, see the sketch, and drag the
