Fenix Reference G12
9
Rev. 0.2.1
Fix the G12-C to the
bulkheads with 2
HW003 M3x8 button
screw in the front
holes.
Rear holes, you need
to install the G12-10
brace and fix brace and
G12-C using HW029
M3x12 button screws.
Tight the screws evenly
using an “X” pattern
Note: the arrow show
a screw that might
interfere with some
motors. Please check.
Use the provided
HW008 M3x6 button
screw to install the ball
stud to the shock
holder.
Note: Wait to install
the shock holder to the
motor group.
Note:
Option for the Alu
version.
Insert 2 x 0.5mm shims
under the link sphere.
Not included in the
carbon version
