Fenix Reference G12
5
Rev. 0.2.1
Using 2 x HW008
M3x6 Button, fix the
servo group to the
G12-7 servo holder.
Insert 2 washer under
the M3x6 screws
Take care to centre
the servo saver
toward the servo
holder.
Note:
Servo is held in place
by 2 (or 3 )15mm post,
according your servo
and chassis setting.
Fix the servo group to
the chassis using
15mm post
Insert the FX0074
3mm shims under the
15mm post
Fix the group to the
chassis (omitted in the
view) with HW007
M3x8 screws
If you are using the 2
post system you can
install the FU-FX48
using the M3x6
HW008 Button screw.
If you are using the 3
post system you can
install the FU-FX48
using the M3x10 grub
screw.
