Fenix Reference G12
8
Rev. 0.2.1
Build 2 set of link using
2 x TR15 and 4 FX0037
- short
Keep this dimensions.
Fix the link over the V-
link F2
Using 4 x HW012
countersunk screws,
fix the motor holder to
the motor pod.
Tight the screws evenly
using an “X” pattern
Note: V-Link F2 is
omitted for sake of
clarity.
Insert the bearing into
the G12-C bearing
holder.
Note that the mark
should be on the same
position (vertex NOT
important) .
G12-C allow you play
with the wheelbase
1mm
