Fenix Reference G12
17
Rev. 0.2.1
Step 4:
Lube the 2x6mm oring with some shock oil or
diff grease, insert it into the recess.
Lube the plastic insert with some shock oil or
diff grease, insert it into the recess, over the
oring.
Tight the bottom nut
Step 5:
Lube the shock shaft with some shock oil and
insert it into the shock body
Step 6:
Fill the shock with your favorite shock oil and
bleed the air bubbles moving the shaft up –
down slowly
Step 7:
Install the shock bladder and tight the upper
cap.
Clean the excess of oil
Step 8:
Install the spring and the shock bottom mount.
Secure it on the shaft with the M3x3 set screw
