TS1700/TK18 PRINTERS OPERATION MANUAL
–
The first ticket should be discarded since the printer cannot estimate the distance to the next
cutting line until it has detect at least one black mark.
5.7. L
ED INDICATOR
The TS1700 has one indicator led to visually inform about the printer status. When the LED lights
or blink GREEN means normal operation. The LED blinks ORANGE whether the TS1700 has detect a
non-recoverable error. The LED blinks RED when a recoverable error has been occurred. If the lights
RED, there is no paper or the door has been opened. See section 5
.9- ERROR PROCESSING.
5.8. SP
ECIAL PRINTING MODES
Besides the normal printing mode in which all the received data are printed according to the
settings or conditions fixed by the commands, the TS1700 printer allows three special working modes:
self-test mode, programming mode and the hexadecimal mode.
5.8.1- Self-test mode
The printer provides the self-
test mode with two different
functionality: showing information
of the settings of that particular
printer model and verifying the
printing.
To enter the self-test mode,
the printer must be powered on
while keeping pressing the button.
The TS1700 will start printing
a report, which allows checking the
features of this particular model,
like the firmware current version,
control functions of the
communications protocol, and so
on.
Once this printing has been
finished, if the button is kept
pressed; the printer will start
printing continuously and
repetitively a character pattern until
it finally concludes the self-test by
printing ‘* * completed * *’. This
second option of the self-test mode
has the goal of validating the
printing speed and quality.
At the end of the self-test
page there are few lines showing
the four different maintenance
counts:
1- Times that the printer has been
switched on.
2- Time (in half hours) that the
printer has been powered on.
3- Meters of paper printed.
22/62
Fig.5.6.
SELF-TEST
mode example.
FENIX IMVICO
TS1700/TK18 V1.0.1
SERIAL PORT SETTINGS
Data bits:
8 (fixed)
Stop bits:
1 (fixed)
Baud rate:
115200 baud
Parity bit:
No parity
Protocol:
Hard.RTS/CTS
USB PORT SETTINGS
USB V2.0
480Mbits/s
DEFAULT TEXT SETTINGS
Set character
EUROPE 437
Table A (12x24 dots)
Character Height:
1
Character Width:
1
Character space:
4
Line space:
15
Print density:
Standard
Black mark:
Disabled
Near-end-paper
Disabled
Carry Return:
Disabled
CUTTER SETTINGS
Automatic full & partial
EXTERNAL TABLES:
(No table loaded)
LOGOS LOADED:
(No logo loaded)
* RECORDS *
Serial num.
0FE057057142
On/Off times:
100
Meters:
100
Cuts:
100
Time ON(H:M):
0:10
!”#$%&'()*+,-./01234567
!”#$%&'()*+,-./012345678
”#$%&'()*+,-./0123456789
#$%&'()*+,-./012345679 :
$%&'()*+,- ./012345679 : ;
%&'()*+,-./0123456779 : ; <
&'()*+,-./0123456779 : ; < -
'()*+,-./0123456779 : ; < - >
()*+,-./0123456779 : ; < - >?
)*+,-./0123456779 :;< - >?@
*+,-./0123456779 :;< - >?@A
+,-./0123456779 :;< - >?@AB
,-./0123456779 :;< - >?@ABC
.
.
.
.
.
vwxyz{ | }~ !”#$%&'()*+,
wxyz{ | }~ !”#$%&'()*+,-
xyz{ | }~
!”#$%&'()*+,-.
yz{ | }~
!”#$%&'()*+,-./
z{ | }~
!”#$%&'()*+,-./0
{ | }~
!”#$&'()*+ , - . /01
| }~
!”#$&'()*+ , - . /012
* * completed * *
