TS1700/TK18 PRINTERS OPERATION MANUAL
[Status flags]
This error involves the following flags activation:
n=<01>
H Printer status → Offline
bit 3
=”1”.
n=<02>
H Offline status → Error occurred
bit 6
=”1”.
n=<03>
H Error status → Unrecoverable error occurred
bit 5
=”1”.
[Recover action]
If paper with no black marks is used replace it by the correct one.
[Note]
Two consecutive black marks cannot be separated more than 50cm.
NO PAPER ERROR / PLATEN OPEN
[Description]
The out-of-paper sensor detects there is not paper on the printing line. When
the door is open the printer will also detect it the same way.
[Status flags]
This error involves the following flags activation:
n=<01>
H Printer status → Offline
bit 3
=”1”.
n=<02>
H Offline status → Error occurred
bit 6
=”1”.
→ Printing is being stopped
bit5
=”1”.
→ Platen is open
bit2
=”1”.
n=<04>
H Continuous paper status → Paper not present
bit 6
=”1”.
[Recover action]
This error disappears loading a new paper roll in the printer and closing the
paper door (see section
- PAPER LOADING).
[Note]
This error stops the printing and it cannot be restarted until it is not recovered.
This error is indicated in the parallel port depending on the conditions set by
the
ESC c 3
command (see section
- CONTROL COMMANDS
).
27/62
