FENIX IMVICO
TK51/IF9000 OPERATION MANUAL
62/82
FS q n [xL xH yL yH d1…dk]1…[xL xH yL yH d1…dk]
[Name] Define NV bit image
[Format] ASCII FS
q
n
[xL xH yL yH d1...dk]1...[ xL xH yL yH d1...dk]
Hex
1C
71
n
[xL xH yL yH d1...dk]1...[ xL xH yL yH d1...dk]
Decimal 28
113
n
[xL xH yL yH d1...dk]1...[ xL xH yL yH d1...dk]
[Range]
n
=
1
xL
≤
48
xH =
0
(when 1
≤
(
xL
+
xH
×
256)
≤
48)
0
≤
yL
≤
255 0
≤
yH
≤
1 (when 1
≤
(
yL
+
yH
×
256)
≤
288)
0
≤
d
≤
255
k
= (
xL
+
xH
×
256)
×
(
yL
+
yH
×
256)
×
8
Total available data area
=
16380 bytes (16KB-4Bytes)
[Description] Define the NV bit image specified by
n
.
•
n
specifies the NV bit image number (always 1).
•
xL
,
xH
specifies (
xL
+
xH
×
256)
×
8 dots in the horizontal direction for
the NV bits image you are defining.
•
yL
,
yH
specifies (
yL
+
yH
×
256)
×
8 dots dots in the vertical direction
for the NV bit image you are defining.
[Notes] From the beginning of the processing of this command till the finish,
mechanical operations (including initializing the position of the printer
head when the cover is open, paper feeding by using the FEED button,
etc.) cannot be performed.
•
NV bit image means a bit image which is defined in a non-volatile
memory by
FS q
and printed by
FS p
.
•
This command is effective only when processed at the beginning of the
line.
•
This command is effective when 7 bytes <FS
∼
yH
> is processed as a
normal value.
•
When the amount of data exceeds the capacity left in the range defined
by
xL, xH, yL, yH
, the printer processes
xL, xH, yL, yH
out of the
defined range.
•
The
d
indicates the definition data. In data (
d
) a 1 bit specifies a dot to
be printed and a 0 bit specifies a dot not to be printed.
•
The definition area in this printer is a maximum of 16KBytes-4Bytes.
•
Once a NV bit image is defined, it is not erased by performing
ESC @
,
reset or power off.
•
This command performs only definition of a NV bit image and does not
perform printing. Printing of the NV bit image is performed by the
FS p
command.
[Reference]
FS p
